Publicidad
Idiomas disponibles
Idiomas disponibles
Film speed setting
The camera is designed to use DX-coded ISO 100 or 400 film, and correct film
speed is automatically set. If non DX-coded film or DX-coded ISO 200 film is
loaded, film speed is automatically set to ISO 100.
Loading film (See Fig. E—page 26.)
1. Slide the camera back lock-release lever in the direction of the arrow
to open.
2. Position the hole in the bottom of the film cartridge over the film rewind fork
and insert the film cartridge into the film chamber.
3. Pull the film leader across to the film leader position index.
4. Make sure the film lies flat between the film guides.
5. Close the camera back. The film automatically advances to the first frame.
Make sure that the number " 1 " is visible in the frame counter.
• To confirm that film is loaded in the camera, glance at the film cartridge
confirmation window.
- 4 -
Publicidad
