How to remove the lid guides for cleaning
The lid guides on the Sealed Pet Bowl are critical parts which allow the lid to
open and close correctly. Both lid guides must be re-attached after cleaning.
1
2
3
4
To replace the lid, follow steps 3 to 5 on page 11.
Firstly, you'll need to remove the Pet Bowl's lid. Press
the Manual Open/Close button and then, once the
lid is open, pull it upwards.
Hold one of the lid guides near the rear and pull
it upwards until you are able to unhook the front
section. You will need to pull it hard! Then do the
same to remove the second lid guide.
Hand wash the lid guides. Do not put them in the
dishwasher.
The lid guides are marked with a small L (left) or R
(right) near the rear to indicate which side each one
fits back into. Make sure to fit them into their correct
sides.
To replace the lid guides repeat the process but in
reverse. Make sure that you hook them in at the
front first and then attach the back.
EN
12