Buttons & Lights; Sensors - Sure Sealed pet bowl Manual Del Usuario

Buttons & lights
All of the Pet Bowl's buttons and lights can be found towards the rear of the product:
Battery light - this light will
flash red when the batteries
are running low.
Power switch - slide right to turn on
and left to turn off. When you turn the
product off the lid will close.

Sensors

The sensors on your Sealed Pet Bowl will react to any physical movement within their
range and are positioned in three separate locations to detect your pet approaching.
Sensor tips & tricks
To ensure the Pet Bowl functions reliably in your home, the sensors will calibrate to their
new surroundings when the product is turned on - see page 4. The sensors will also need
to recalibrate any time the Pet Bowl is moved. Therefore, after moving, the lid may stay
open for a bit longer than normal, but it will sort itself out again once the sensors have
readjusted to their surroundings.
We don't recommend positioning the Pet Bowl in a location where the sensors are
constantly activated, for example under a low surface, or with one side up against a wall,
as this could affect the sensor calibration - see page 8.
5
Manual Open / Close button - allows
you to override the sensors so you can
keep the lid open. It will illuminate
white when activated.
Training button - used to teach
your pet how to use the Pet Bowl.
Illuminates orange. See page 9.