Features; Assembly - Ryobi P716 Manual Del Operador

PRODUCT SPECIFICATIONS
Bulb ........................................
Light Output ................................................. 2,800 Lumens
KNOW YOUR XENON HI-BEAM™
See Figure 1, page 9.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
UNPACKING
This product requires tag
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Xenon Hi-Beam™
Operator's Manual

FEATURES

4,300 K, 35 Watt HID Xenon

ASSEMBLY

removal.
Weight ..................................................................... 2.5 lbs.
LOCK-ON BUTTON
The lock-on button is convenient for continuous use for
extended periods of time.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
REMOVING THE WARNING LABEL
See Figure 2, page 9.
The Xenon Hi-Beam™ has a cling-type attached warning
label on the lens. Read carefully and remove this warning
label before use.
5 — English