Bluetens Duo Sport Manual De Usuario página 118

Table 206
RECOMMENDED SEPARATION DISTANCES BETWEEN
PORTABLE AND MOBILE RF COMMUNICATIONS EQUIPMENT AND THE BLT15DS
The BLT15DS is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
The customer or the user of the BLT15DS can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications equipment (transmitters) and the BLT15DS as recommended
below, according to the maximum output power of the communications equipment.
Rated maximum Separation distance according to frequency of transmitter
output power of
150 kHz to 80 MHz
transmitter
W
0,01 0.12
0,1 0.38
1 1,2
10 3,8
100 12
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in me-
ters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
234
80 MHz to 800 800 MHz to 2,5 GHz
MHz
0.12 0.23
0.38 0,73
1,2 2,3
3,8 7,3
12 23
235