Operating Elements And Connections - Monacor TXA-1022CD Manual De Instrucciones

Portable
High-Power Amplifier System
These operating instructions are intended
for users of the amplifier system (e. g. DJs,
speakers at public and private events) and
do not require any specific technical knowl-
edge. Please read these operating instruc-
tions carefully prior to operating the unit
and keep them for later reference. All oper-
ating elements and connections described
can be found on the fold-out page 3.
Contents
1 Operating Elements and
Connections . . . . . . . . . . . . . . . . . 10
2 Safety Notes . . . . . . . . . . . . . . . . . 11
3 Applications . . . . . . . . . . . . . . . . . 11
3.1 Conformity and approval . . . . . . . . 12
4 Setting Up / Transporting . . . . . . 12
5 Power Supply . . . . . . . . . . . . . . . . 12
5.1 Mains operation /
recharging the batteries . . . . . . . . . 12
5.2 Battery operation . . . . . . . . . . . . . . 12
6 Audio Connections . . . . . . . . . . . 12
6.1 Inputs . . . . . . . . . . . . . . . . . . . . . . .12
6.2 Outputs . . . . . . . . . . . . . . . . . . . . . 12
7 Operation . . . . . . . . . . . . . . . . . . . 12
7.1 Operating the receiving module . . 12
7.1.1 Changing the group setting
(for operation with 2 receiving modules)
7.1.2 Setting the squelch . . . . . . . . . . 13
7.2 Operating the Bluetooth receiver . . 13
7.3 Operating the CD / MP3 player . . . 14
7.3.1 Remote control . . . . . . . . . . . . . 14
7.3.2 Switching on and off /
inserting and removing the
playing medium . . . . . . . . . . . . . 14
7.3.3 Selecting the playing medium . . 14
7.3.4 Replay / pause / stop . . . . . . . . . . 14
7.3.5 Adjusting the volume / muting . . 14
7.3.6 Track selection . . . . . . . . . . . . . 14
7.3.7 Fast forward and reverse . . . . . 14
7.3.8 Repeat functions /
random track sequence . . . . . . 14
7.3.9 Playing a loop . . . . . . . . . . . . . . 15
7.3.10 Changing the replay speed
and pitch . . . . . . . . . . . . . . . . . . 15
7.3.11 Programming a track sequence 15
8 Specifications . . . . . . . . . . . . . . . .15
10
1 Operating Elements
and Connections
1 Display of the 2-channel receiving mod-
ule, indicates the transmission channel
and, by means of a segment bar, the
strength of the radio signal received
(left: receiving unit A, right: receiving
unit B)
2 Power switch and volume control, for
receiving unit A and receiving unit B of
the 2-channel receiving module
3 Buttons to set the 2-channel receiving
module: chapter 7.1
4 Status indicators for the rechargeable
batteries
When operated with rechargeable bat-
teries:
The respective LED indicates the
charging state of the batteries. When
the LED "20 %" starts flashing, re -
charge the batteries as soon as pos-
sible.
When connected to the mains:
The LEDs light up continuously one
after the other while the batteries are
being recharged. When the batteries
have been completely recharged, the
LED "FULL" will light up.
5 POWER switch of the unit, will light up
during operation
6 Tone controls: TREBLE for high fre-
quencies and BASS for low frequencies
7 Volume control for the input signal of
the jacks LINE IN (13)
.13
8 Volume control for the input signal of
the jack AUX IN (15) and for the inte-
grated Bluetooth receiver
9 Volume control for the input signal of
jack MIC 2 (17)
10 Volume control for the input signal of
jack MIC 1 (18)
11 Control MASTER for the overall volume
12 Button VOICE PRIORITY with LED
indicator for the microphone priority
function: When the button is pressed
(LED illuminated), the volume of the
other audio sources will be substan-
tially reduced during microphone an -
nouncements.
13 Input LINE IN (RCA jacks) to connect
an audio source with line signal level,
e. g. CD / MP3 player
14 Outputs LINE OUT (RCA jacks) and
AUX OUT (3.5 mm jack) to feed the
mixed signal of the audio sources used
to another active speaker system or to
a recorder, for example
Note: The tone controls (6) and the control
MASTER (11) will not have any effect on
the output signals at these jacks.
15 Input AUX IN (3.5 mm jack) to connect
an audio source with line signal level,
e. g. CD / MP3 player
16 Button to switch the Bluetooth receiver
on (keep pressed for a longer period of
time) or off (press briefly)
( chapter 7.2)
Button flashes:
no connection to the Bluetooth audio
source
Button continuously illuminated:
connection to Bluetooth audio source
established
17 Input MIC 2 (6.3 mm jack) to connect a
microphone
18 Input MIC 1 (combined 6.3 mm jack/
XLR jack) to connect a microphone
19 Mains jack for connection to a mains
socket (230 V~ / 50 Hz) via the mains
cable provided
CD / MP3 player with remote control
20 CD slot: insert the CD so that it is
retracted automatically
21 USB port for connection of a USB
storage device, e. g. USB flash drive,
USB hard disk with separate power
supply
22 POWER button
23 IR sensor for the signals of the remote
control
24 Display, shows
- for audio CDs
the insertion "CD" and the track
number, e. g. for track No. 10
(in the stop mode: total number of tracks)
for MP3 playing media
the insertion "MP3", the folder num-
ber and the track number in the
folder, e. g. for the 8th track in the 2nd
folder
(in the stop mode: total number of folders and
total number of tracks)
- the time played of the track
(min. : sec.)
- for replay, for pause
- insertion for the repeat function
selected ("REPEAT 1", "REPEAT
FOLDER" or "REPEAT ALL")
button REP (37)
- insertion "SHUFFLE" for replay of
the tracks in a random order
- insertion "PROGRAM" when pro-
gramming an individual track se -
quence