Operation Of Isdb-T Function - Multilaser P3212 Manual Del Usuario

1: Left
2: Right
3: Mute
4: Volume up
5: Volume down
6: GPS
7: Power
8: Mode
2.
Connect the control wire of vehicle steering wheel to that of main unit. Take "MODE" key for
example; long press it and notice that the voltage option on the screen will have value display. Click
"MODE" again on the main unit steering wheel learning interface and the "MODE" will be displayed
in green. Press "OK" to save it and a set value will be displayed in set number filed, which means it
is successfully paired (Setting of other keys is similar).
3. After setting all the keys, press

4.9 Operation of ISDB-T function

1. Introduction of ISDB-T operating interface, as shown in Figure 26.
1: Menu
2: List of channels
3: Search
4. Description of main function operation
9: Up
10: Down
11: Frequency range
12: Confirm
13: Previous track
14: Next track
15: Fast backward
16: Fast forward
to save and complete setting.
4: Previous page
5: Next page
6: Signal prompt
50