Marvel ML24BC Instrucciones De Instalación, Operación Y Mantenimiento página 17

Step 5: Assemble lock parts
Two (2) lock extensions are provided with the lock. Use
the longer extension for ⁄
3
4
shorter one for ⁄ " thick overlay panels. Assemble the lock
5
8
extension, cam stop washer, spring washer, and set screw
to the lock as shown in Figure 22 and Figure 24.
Install this lock assembly into the lock hole in the overlay
panel and secure with the retaining nut on the back side
with a 15 mm socket and ratchet. Make sure the key slot in
the front of the lock is vertical.
BRASS EXTENSION
SPRING WASHER
NUT
LOCK
1/2 HOLE
13/16 COUNTER
BORE 7/16 DEEP
3/4 INCH
WOOD PANEL
Figure 22
Step 6: Install lock cam
Attach the lock cam to the back of the lock assembly with
the phillips head screw provided. Orient the lock cam verti-
cally when installing on the lock.
OVERLAY DOOR PANEL INSTALLATION
" thick overlay panels and the
CAM
PHILLIPS SCREW
INNER
DOOR
SECTION A-A
SCALE 1 : 1
#10 x 1/2"
screw
⁄ "
17
32
(13.7 mm)
1
through door panel, from
other side (see detail
above)
counter bore,
deep.
Figure 23
17
Counter bore
lock hole
on back side.
Figure 23a
3 / "
1
2
(89 mm)
⁄ " (13 mm) diameter drill
2
⁄ " (20.5 mm)
13
16
⁄ " (11 mm)
7
16