Sunny Health & Fitness SF-B1423 Manual Del Usuario página 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
#88
35
36
37
38
#11
M10*H9.5*S17
#6 M1 0*35*15*H6 2pcs
#8 3 M5* 12
9
9
91
S14
2pcs
#89
S17
#88
1p c
8 3
2
6
8
11
38
10
91
85
STEP 4:
Loosen and remove the [seat slider] Adjustment
Knob (No. 38). Insert Seat Slider (No. 36) into the
Seat Post (No. 37). Adjust the Seat Slider (No. 36)
to the desired position, re-insert and tighten
Adjustment Knob (No. 38) to secure the post in
place.
Secure Seat (No. 35) to the Seat Slider (No. 36)
with Spanner (No. 88).
NOTE: Before you fully tighten the seat, you can
adjust the front of the seat higher or lower to meet
your needs.
STEP 5:
Loosen and remove the [handlebar] Adjustment
Knob (No. 38). Insert Handlebar Post (No. 10)
into the sleeve located on the front of the Main
Frame (No. 85). Adjust the Handlebar Post (No.
10) to the desired position and reinsert and tighten
the Adjustment Knob (No. 38) to secure the post
3
in place.
Secure Handlebar B (No. 8) to Handlebar Post
(No. 10) using 2 Bolts (No. 6) and 2 Nuts (No. 11).
Tighten and secure with Spanner (No. 89).
Remove Screw (No. 83) from Handlebar B (No. 8)
with Spanner (No. 88). Attach Tablet Bracket (No.
2) onto the Handlebar B (No. 8) with Screw (No.
83) that was removed. Tighten and secure with
Spanner (No. 88).
Attach the Computer (No. 9) to the bracket located
on the Handlebar Post (No. 10). Connect the link
wire of the Computer (No. 9) to the Trunk Wire
(No. 91).
The assembly is complete!
11