Reer 5006 SCOPI Manual Del Usuario página 24

Ocultar thumbs Ver también para 5006 SCOPI:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
External Microphone
For the baby monitor function we supply an external microphone (type BM 1). We recommend
it to use always in case of baby monitoring. This has the following advantages:
It is more sensitive than the build-in microphone and it responds to a greater
distance.
It allows you to extend the distance between transceiver and baby cot – HF radiation
is greatly reduced!
It allows you to position the radio in optimum location, such as the windowsill or high
up on a wardrobe.
As long as the external microphone is connected no settings can be made on the
radio.
Please locate the BM1 microphone in a position where the baby cannot reach it. Use the
supplied sticky pad to safely attach the microphone.
Connect the microphone to the MIC jack on the side of the baby unit. Flap the rubber cap open
and use the bottom jack.
Chapter 2: Advanced Functions and Use As PMR 446 Transceiver
By default the units are pre-programmed as baby monitoring system. In order to switch to the
normal transceiver mode press Menu 2x and select of. They can be used for different purposes;
as walkie-talkies for older children, during hikes and trips, events, maintenance work in and
around the house, where communication is needed and for many more purposes. The
communication range is up to 5 km, depending on the terrain, in open spaces with no
obstructions or reduced range in the city.
PTT Button To Talk
Press and hold the PTT button to transmit; release the button to receive.
PTT Button To Call
Briefly press the PTT button twice in quick succession.
The unit transmits a call melody to all other units on this channel within your
range.
24
English

Publicidad

Tabla de contenido
loading

Tabla de contenido