Product Description; Prior To First Use - tomado TMF1201S Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Before using the appliance for the first time, please proceed as follows: carefully remove the milk frother from its packaging and
remove all the packaging material. Keep the packaging (plastic bags and cardboard) out of the reach of children. After unpacking
the appliance, check it for external damage that may have occurred during transport. Place the milk frother on a heat-resistant
flat surface.
Clean the cover, whisk and mixer with warm water and a mild washing-up liquid. Dry these components thoroughly.
Only clean the base unit and interior with a moist cloth and dry thoroughly. The milk frother is only suitable for frothing
and heating milk. Never fill the milk frother with other liquids.
Check that the voltage corresponds with what is stated on the information plate. Insert the plug in the socket.
Mount the mixer at the bottom of the milk frother. Fill the milk frother with the required amount of milk. Take note of the upper
maximum indication for only heating milk - MAX
Place the cover and place the milk frother on the power base. Briefly press the ON button to switch on the milk frother.
Both indicator leds (blue/ red) light up and the mixer starts to rotate.
Depending on the amount of milk, the milk frother stops automatically after approximately 100 to 120 seconds. The blue indicator
led switches off and the red indicator led continuous to flash for approx. 30 seconds to indicate that the milk frother is ready.
When the milk frother is ready, remove the cover and pour the hot milk in a mug or cup.
After use, the milk frother should be cleaned as described in chapter CLEANING & MAINTENANCE.
Allow the milk frother to cool for 2 minutes before using it again or put some cold water in the milk frother. By doing this,
you can start using it again sooner.

PRODUCT DESCRIPTION

1
1. Cover with silicone ring
2. Handle
3. Indicator led blue - cold
4. Indicator led red - warm
5. On / Off button
6. Power base
2
7. Maximum indication for heating - MAX
8. Maximum indication for frothing - MAX
9. Whisk (frothing)
3
4
10. Mixer (heating)
5
6

PRIOR TO FIRST USE

HEATING MILK
- 240 ml.
EN - 10
7
8
9 10

Publicidad

Tabla de contenido
loading

Tabla de contenido