Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The battery is being charged. It goes off when charging is complete.
15. Power on switch and key lock
16. Reset button
Resets the Reader if no operation is possible. The Reset button is located on the
backside of the Reader.
2.2 Turning on/off the Reader
Slide and hold the Power switch for 2 seconds to turn on the Reader. Make sure to turn
on the Reader before connecting to your computer.
Slide and hold the Power switch again to turn off the Reader.
Notes
When turning on the Reading the Reader starts to scan all books in the Reader.
Depending on the total number of books stored on the internal flash memory and
external Micro SD (TF) card, the scanning process can take several minutes. The
scanning process is necessary for the sorting operations and displaying the book
cover in the book list.
The scanning operation starts automatically in the following cases:
After switching on the device;
−
An external Micro SD (TF) card has been removed or inserted;
−
A book of supported formats has been downloaded and you exit the browse.
−
After disconnecting the Reader from the USB port of a computer.
−
2.3 Power Management of the Reader
The Reader has a Power Management feature to avoid unnecessary battery
consumption. At purchase, the Power Management is activated. The Power
Management operates as follows:
After 15 minutes of inactivity, the Reader switches off itself automatically. You can
activate/deactivate the Power Management from the "Power Management" option in
the "Settings" menu.
2.4 Suspend and Wake up Mode
In order to save energy, the Reader goes to the "sleep" (suspend mode) after 3
seconds inactivity of keyboard or touch screen. Press any key to reactivate (wake up)
the Reader again.
Hint:
Tapping on the touch screen does not reactive the Reader.
2.5 Charging the Reader
You need to charge the Reader when using it for the first time, or when the remaining
battery power is low. Charge the Reader in one of the following ways.
Connect to an AC outlet using the AC Adapter with 5V 1.5A or 5V 2A for the Reader.
It will take approximately 5 hours to fully charge the battery.
Connect to a computer via USB. The charging through USB takes significantly
more time than through an AC outlet.
39
Publicidad
Capítulos
Tabla de contenido
