INSTALLATION (CONTINUED)
Important:
Do not replace or lengthen the exhaust hose as this could cause the unit to malfunction.
NOT RECOMMENDED
WARNING: Any warranties included with this product will be voided if an extra extension hose is added to
the originally provided installation kit or if the installation is performed differently than the manufacturer's
instructions, without proper consultation. Please contact Customer Support for help with installation
procedures if needed.
•
The supplied exhaust hose has a diameter of 5.9 inches (15 cm) and can be extended from 10.6
inches to 59 inches (27 cm to 150 cm).
•
Do not bend (to the extent shown below) the exhaust hose. A bent hose will block exhaust air and
cause the unit to malfunction or shut-off.
•
Make sure the back of the unit is at least 50 cm / 20 inches away from the wall. Do not place the unit in
front of curtains or drapes as this could obstruct the airflow.
RECOMMENDED
EN
5
50 cm / 20"