Remote Control - Honeywell HQ09 Serie Manual Del Propietário

USE & OPERATION (CONTINUED)

REMOTE CONTROL

The functions work the same as the Honeywell Portable Local Air Conditioner's Control Panel.
All key functions can be accessed from the remote control.
Power Control
Mode Control
Press this button to change the
operation mode
COOL DRY
HEAT*
Timer Control
In running mode: Auto switch off
In stand-by mode: Auto switch on
Press ▼ or ▲ button to adjust the time
setting for 1 hour intervals.
Note:
• Battery Installation: Remove the cover on the back of the remote control and insert two AAA batteries
with + and - pointing in the proper direction according to the polarity markings.
Caution:
• Use only two AAA or IEC R03 1.5V batteries.
• Remove the batteries if the remote control is not in use for a month or longer.
• All batteries should be replaced at the same time, do not mix with old batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Properly dispose of used batteries.
ON / OFF
FAN
Temperature / Timer Set
• Used for adjusting the timer and temperature.
When the ▼ or ▲ key is pressed, the set
•
temperature is displayed and may be adjusted.
Timer setting is available from 1-24 hours by
•
pressing the key ▼ or ▲.
EN 8
Fan Speed Control
• HIGH • MID • LOW
Sleep Control
ON / OFF
*Applicable for models with Heating feature only.