Basic Guide
Getting ready to copy to a DVD!
A
Get ready a recommended disc
Use DVD-R, DVD-RW or DVD-R DL disc of the brands listed below.
DVD+R, DVD+RW and DVD-RAM cannot be used.
Brand
Caution
B
Connect
CU-VD3
Power input
To DC jack
Important!
When the DVD created on this burner cannot be played on other devices, play
back using this burner. (A P. 8)
If you encounter any problems, refer to "Troubleshooting". (A P. 15)
Follow the instructions in the instruction manual of the Everio camera when
connecting and operating the Everio camera.
4
DVD-R
JVC, TDK, Verbatim,
SONY
Use a commercially available cleaning cloth to wipe the disc gently if there are any
fingerprints or dirt. Applying too much strength will result in scratches.
Do not use discs that are scratched.
DVD-R DL discs can be used only when the burner is connected to a high definition
Everio camera.
The power lamp lights
in green.
USB cable
DVD-RW
DVD-R DL (Single-sided double layer)
JVC
JVC, Verbatim
USB extension cable
Use if necessary.
Use the AC adapter to
power on the Everio
camera.
Everio camera
To DC jack