Archos Gps Kit; Description Of The In-Car Holder - Archos 605 GPS Manual De Usuario

GPs
1�4� aRChOs GPs kIT
list of GpS components included in the package:
the installation dvd
guide you through the installation of the maps and latest software onto your ARCHOS player.
the in-car holder
player. Therefore, your player MuST be mounted on the in-car holder, so that it can locate
your position and help you get to your destination.
4 pairs of rubber spacers
in-car holder. See section 2.2.
the car power adapter
nected to the in-car holder and to the cigarette lighter.
2 archos connection cables
GpS to function, this cable MuST be connected to the in-car holder and to the ARCHOS player.
The TMC (Traffic Message Channel) antenna
on your ARCHOS GpS. See chapter 6. Other Functions. If you have purchased the GpS in-car
holder as an accessory, this function is not available.
1�5� desCRIPTIOn Of The In-CaR hOldeR

1
: before setting up the GpS in your car, you need to run this dVd which will
: it contains a GpS receiver which will send the GpS signal to your ARCHOS
: to adapt best to your ARCHOS player, so that it is held tight by the
: in order for the GpS to function, the power adapter MuST be con-
(one for the ARCHOS 605 and one for next generation devices)
5
4
6
3
1
: in order to use the traffic information functionality
1. location for the rubber spacers
2. Adjustable top grip (to hold ARCHOS player
tight)
3. Grip release (to release ARCHOS player)
4. Suction cup (to adhere to the windshield)
5. locking lever (to lock the suction cup)
6. Suction release tab (to release in-car holder)
User manUal - version 4
: in order for the
5