Installing A Usb Driver For Windows; Installing A Usb Driver For Macintosh - Panasonic AJ-PCD2G Instrucciones De Funcionamiento

Installing a USB Driver for Windows

Refer to the installation manual in the "Manuals" folder on the CD-ROM for
information on how to install the Windows drivers.

Installing a USB Driver for Macintosh

This driver software enables a Macintosh to access content on a P2 card inserted
in the P2 drive.
Perform the following steps to install the driver.
1
Insert the supplied CD-ROM.
2
Double-click the "Macintosh" folder on the CD-ROM.
3
For Mac OS X 10.5:
Double click the "Leopard" folder on the CD-ROM.
For Mac OS X 10.6:
Double click the "Snow Leopard" folder on the CD-ROM.
4
Double click the "P2Drive" folder.
5
Double click the "P2DriveFamilyDriver Install.dmg" disk image
module in the "P2Drive" folder.
6
Double click the "P2DriveFamilyDriver Install.pkg".
7
The driver software installation process will now start. Follow the
instructions given in the installation screen.
◆ NOTE:
• If the USB driver is not installed, a sufficient transfer rate may not be obtained.
For the latest information on software drivers, visit the following Web site. For the latest information on software drivers, visit the following Web site.
http://pro-av.panasonic.net/ http://pro-av.panasonic.net/
E-12