Before Use; Overview; Features - Panasonic AJ-PCD2G Instrucciones De Funcionamiento

Before Use

• While the AJ-PCD2G is connected to a computer, install the required drivers
from the CD-ROM.
Refer to the installation manual in the "Manuals" folder on the CD-ROM for
information on how to install the drivers for Windows.
Refer to "Installing a USB driver for Macintosh" on page E-12 in this manual for
information on how to install drivers for Macintosh.
• The AJ-PCD2G may become warm during use, but this is not a malfunction.

Overview

The AJ-PCD2G (referred to as "P2 drive" below) is a single-slot drive for reading
and writing P2 content on P2 cards (1 card at a time) when connected to a
Windows PC or Macintosh via USB 2.0 (two USB cable connections that provide
bus power).
The P2 drive is capable of making high-speed transfers of clip data shot with a
memory card camera-recorder for P2 cards to a personal computer (Windows/
Apple Macintosh).
This device supports not only the transferring and copying of clips recorded on P2
cards, but also direct editing.

Features

• Single-slot P2 card drive with USB 2.0 interface
• Light and compact construction makes it portable and ideal for field work with a
notebook PC
• Supports both Windows and Macintosh operating systems
• USB bus power eliminates need for AC adapter*
*1: Two USB cables are required.
E-5
1