WARNINGS!
Do not modify the indications of the rating plates.
Mincer model....................................
Serial number..................................
Manufacturing year...........................
Type................................................
A = machine model
B = serial number
C = motor tension Volt
D = motor power Hp
E = motor frequency Hz
F = motor power Kw
G = Ampére
H = machine weight Kg
I = year of production
L = producer
Fig. 1.7.1
1.7.1 - Danger and warning plates (fig. 1.7.2)
Do not perform any intervention on the electric parts when the machine is
connected to the power supply.
There is a risk of electric shock.
Comply to the warning plates. The non respect of the warning plates can
cause severe injuries.
Check that the warning plates are always installed and legible.
Otherwise install or replace them.
WARNINGS!
.
A
B
C
B
8
L
A
C
G
A
380 VOLT
B
D
E
F
H
I
C
Fig. 1.7.2