Maintenance - Omcan FP-CN-0006 Manual Del Usuario

Maintenance

• Turn the speed adjusting knob to the "0" position.
Clean the cover, rotating blades, axis and container
Rotate the loading arm, remove the cover, and the blade fixing axis and container can be lifted easily. Then use
water and a neutral detergent to clean the above-mentioned parts.
Attention: Gloves should be worn for protection while operating and cleaning.
Attention: Machine must be switched off and unplugged.
Clean the machine body with a neutral detergent and damp cloth. Use a dry cloth to dry the machine after
cleaning.
MAINTENANCE
Belt
The belt does not need to be adjusted.
Feet
As time goes on, the feet will deteriorate. You should change it to prevent accidents, please contact Omcan
and request a replacement.
Power Cable
The power cable should be checked regularly. If it is damaged, please contact Omcan and request a
replacement.
Blades
Check whether the width of blades is less than 5cm. If it is, please contact Omcan and request a replacement.
Label
When the label is damaged, please contact Omcan and request a replacement.
REFERENCE
Item Number Model Number
23545 FP-CN-0006
23546 FP-CN-0009
Description
Bowl Cutter 6 L / 6 QT 1100-2800 RPM
1 HP / 750W 110V/60/1 cETLus ETL
INTERTEK
Bowl Cutter 9 L / 9 QT 1100-2800 RPM
1 HP / 750 W 110V/60/1 cETLus ETL
INTERTEK
8
Manufacturer Model Number
HR-6
HR-9