Product Use And Procedure; Before Using A Device; Setup And Use; Mode Setting - DAESUNG MAREF Doctor Life MK400L Manual Del Usuario

5

Product use and procedure

5-1. Before using a device

For a user during initial period, we recommend you to use this device from the lowest
pressure intensity, and increase the pressure intensity gradually with checking the body
conditions under a doctor's advice for more safe and effective use. Please check the
condition of the sleeve and device before use. Please make yourself as a comfortable
posture for best effects.

5-2. Setup and use

1) Set the device on a desk or flat place horizontally and connect the AC cord (plug)
the device after checking local voltage.
2) Insert the plug of a connectable tubing into a socket of the device perfectly.
3) Connect a tubing to a sleeve.
4) Apply the selected sleeve to a patient. We recommend for a patient to sear thin cloths
to protect skin and sweater during operation. (Please zip up perfectly. If unzipped
sleeve can damage the skin or sleeve during operation)
5) Set the devices of MODE, TIME, PRESSURE, SPEED and REVERSE.
Or press the START/STOP button without any setting for the previous setting use or
factory recommended setting use.
6) Press START/STOP button to start operating.
7) If the timer does not end during use, please press the Start / Stop button again
to deactivate the device.
8) After the air is completely deflated from the sleeve, disconnect the power cable
and press the power button to completely shut off the power.

5-3. MODE setting

Touch the MODE button until you can select your wanted mode from A mode, B mode, C
mode. If you touch "
in order of A mode > B mode > C mode > A mode
24
"of MODE, MODE indicator LED is displayed to the selected mode