Maintenance; Environmental Protection; Rs Warranty Statement - RS Components 18410192476 Instrucciones De Uso

WARNING: Over-tightening can result in the
screw breaking or damage to the end of the driver bit.
y
WARNING: If the machine is held at an angle
to the screw being tightened, the head of the screw
may be damaged, or the specified torque may not be
transmitted to the screw. Always keep the machine
and the screw being tightened in a straight line.
IX - Maintenance
s
switch (6) in central position before any work on the
machine e. g. fitting and removing a battery, tool
-
change, transport, maintenance and storage.
m
Regularly check that all the fixing screws are tight. They
may vibrate loose over time.
-
CleANING
For safe operation always keep the machine and its ven-
- tilation slots clean.
Regularly check to see if any dust or foreign matter has
entered the grills near the motor and around the switch-
es. Use a soft brush to remove any accumulated dust.
Wear safety glasses to protect your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with a soft
damp cloth. A mild detergent can be used.
WARNING: Never use alcohol, petrol or other
cleaning agent. Never use caustic agents to clean
plastic parts.
s
-
WARNING: Water must never come into con-
tact with the tool.
m
s
CHARGeR CleANING INstRUCtIONs
d
d
WARNING: Disconnect the charger from the
AC outlet before cleaning.
h
▪ Dirt and grease may be removed from the exterior of
the charger using a cloth or soft non-metallic brush.
Do not use water or any cleaning solutions.
ImPORtANt! To assure product safety and reliability,
-
repairs, maintenance and adjustment (including brush
t
inspection and replacement) should be performed by
certified service centres or other qualified service or-
ganisations, always using genuine replacement parts.
Original instructions
RS-754-1924-pages-BR2 10.8Li.indd 9
WARNING: Always set the forward/reverse
X - Environmental protection
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
for eU-countries only:
Do not dispose of the power tool into household
waste! According to the guidelines 2002/96/EC, power
tools, which are not usable, should be recycled.
batteries:
Do not dispose of the power tool or the bat-
tery into household waste, fire or water. All
type of batteries should be sorted for environ-
mental-friendly recycling or destroyed.
for eU-countries only:
Defective or worn out batteries must be recycled accord-
ing to the guidelines 91/157/EEC.
XI - RS Warranty statement
For products purchased from RS: RS warrants that if any
product is defective, it will replace or repair the product
or refund the purchase price. This warranty is subject to
a claim being made in writing to RS within the warranty
period of the original date of despatch, or such other
longer period as may be indicated by RS for specific
products from time to time in writing.
For full terms and conditions please visit:
http://www.rs-components.com
Notes
Carefully read the entire Original Instructions before us-
ing this product.
The manufacturer reserves the right to change specifica-
tions without notice.
Specifications may differ from country to country.
9
EN
8.6.2012 . 15:09:08 .