Go Power SunFilm GP-SF-1.5 Manual Del Usuario página 3

___________________________________________________________
Do not touch the terminals while the module is exposed to light. Cover the
module face completely with opaque material to halt the production of electricity
when installing or working with modules or wiring.
Be aware that the solar module is a live power source generating electricity when
exposed to any light source. Do not drop the solar module or allow objects to fall
on it. Do not concentrate sunlight on the solar module with a mirror or lens.
Observe proper polarity throughout the SUNfilm installation.
Follow the Safety Precautions of the battery manufacturer. Do not produce
sparks when working in locations where flammable gases or vapors exist.
3.0 Specifications
Rated power
Peak current
Peak voltage
Open circuit voltage
Dimensions (inches)
Dimensions (mm)
Weight
Warranty
UPC
*Specifications subject to change without notice
Note: Specifications are measured values at standard test conditions of 1000
W/m2 at 25° C.
4.0 Features
• Portable design
• Rigid frame
• Maintenance free
4.1 Accessories
a. Male 12V car charger
b. Charging indicator light (on charger)
c. Length of wire
1.5W
100mA
15VDC
19.6VDC
6.5 x 14.5 x 0.5
165 x 368 x 12
0.5 kg / 1 lb
5 year limited
8-39085-00200-1


3m / 10 ft.
GP‐SF‐1.5
3