Tabla de contenido
Publicidad
LUBRICATION
Ingersoll–Rand No. 50
Always use an air line lubricator. We recommend the
following Filter–Lubricator–Regulator Unit:
For USA – No. C28–04–FKG0–28
After each eight hours of operation, unless an air line
lubricator is used, remove the Oil Chamber Plug (4) and fill
the oil chamber with Ingersoll–Rand No. 50 Oil.
After each forty–eight hours of operation, or as
experience indicates, inject about 4 cc of Ingersoll–Rand
No. 100 Grease into the Grease Fitting (25).
Model
2906P1
PISTOL GRIP WITH 7/16" HEX DRIVE and QUICK–CHANGE ANVIL
2906P7
PLACING TOOL IN SERVICE
Ingersoll–Rand No. 100
HOW TO ORDER AN IMPACTOOL
PISTOL GRIP WITH 1/2" SQUARE DRIVE
Impacts/min.
5,000
5,000
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
Recommended Torque Range
ft–lb
40 – 350
40 – 310
3
FILTER
COMPRESSOR
(Dwg. TPD905–1)
Nm
54.2 – 475
54.2 – 420
Publicidad
Tabla de contenido
