Paper (Label) Specifications; Ribbon Specifications - TEC B-450-HS SERIE Manual De Instrucciones

2. SPECIFICATIONS

2.3 PAPER (LABEL) SPECIFICATIONS

Item
Span of one label
Label length
Width including backing paper
Label width
Gap length
Black mark length
Effective print width
Effective print length
Print speed up/slow down area
Outer roll diameter
Thickness (Backing paper + label)
Thickness of backing paper

2.4 RIBBON SPECIFICATIONS

Type
Width
Length
Outer diameter
NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper and
ribbons.
2. For further information about paper and ribbon, refer to Section 10. CARE/HANDLING OF THE PAPER
AND RIBBON.
2.5 OPTION
Option Name
Cutter module
Strip module
Keyboard module
NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC repre-
sentative or TOSHIBA TEC Head Quarter.
Label dispensing mode
Spool type
60 mm ~ 110 mm
(270 m)
Ø65 mm (max.)
Type
B-7204-QM
B-7904-H-QM
KB-80-QM
Batch mode
7.0 ~ 999.0
25.4 ~ 999.0
5.0 ~ 997.0 23.4 ~ 997.0
25.4 ~ 110.0
20.0 ~ 107.0
2.0 ~ 20.0
10.0 ~ 103.6
3.0 ~ 200.0
21.4 ~ 200.0
MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2)
0.1 ~ 0.17
A stop-and-cut rotary cutter
This module strips the label from the backing paper with the
take-up block and strip block.
This module is an external intelligent keyboard unit.
E2-2
ENGLISH VERSION EO1-33020
2.3 PAPER (LABEL) SPECIFICATIONS
Strip mode Cut mode
37.0 ~ 999.0
31.0 ~ 993.0
2.0 ~ 20.0 6.0 ~ 20.0
2.0 ~ 10.0
29.0 ~ 200.0
1.0
0.13 ~ 0.17 0.1 ~ 0.17
0.056 ~
Description
[Unit: mm]