Water Quality Maintenance
Cal Spas Clear Water Plan
Great spa water is easily achieved when the right
chemicals and / or systems are used and the Cal Spas
"Clear Water Plan" is implemented. The key to clean,
clear, and safe water is to fully understand how spa
water reacts to users, system operation and chemical
use. The "Clear Water Plan" will help give you that
understanding.
The first thing to understand about taking care of your
spa water is that preventive actions are much easier to
do than correcting water quality issues. For this reason,
we offer the "Clear Water Plan" as a simple, easy to
follow guide to clean, safe spa water.
Follow the Right Plan
You will need to decide which chemical plan or
alternative sanitation option works best for your spa
water. Consult your Cal Spas dealer for the right
decision with regards to your lifestyle and spa usage.
Whichever plan you decide on, follow it completely and
don't take shortcuts. These plans will provide you with
clean, safe, clear spa water with a minimum of effort.
Traditional Chemical Options
Choose from either Bromine tablets or Chlorinating
granules as your sanitizer of choice. Both work well
when the appropriate "Clear Water Plan" is followed.
Make sure you follow all instructions and use only Cal
Spas brand chemicals.
Alternative Sanitation Options
Cal Zone Quest 2000 Ozonator
This system automatically generates ozone gas and
injects it into the spa water. Ozone gas is far superior
to chemical bromine or chlorine in sanitizing spa water.
Saves replacement chemical cost and guards against
forgetting to add chemicals.
Cal Clarity Automatic Bromine Generator
This system automatically generates and releases
free bromine into the spa water. No more need to add
chemical bromine tablets or chlorine granules. Saves
replacement chemical cost and circumvents the need
to add chemicals on a regular basis.
2007 Portable Spa Owner's Manual
LTR20071001, Rev. B
Water Quality Maintenance
Cal Inline Sanitation System
This system incorporates minerals that work
continuously with low levels of Bromine to sanitize
the spa while creating water that feels soft and is
crystal clear. Uses pre-filled cartridges that save on
measurement hassle and works for weeks without
replacing.
Before You Begin
Before you begin a "Clear Water Plan", you should
understand that chemicals or systems alone will not
take care of your spa water. Other factors such as
Filtration and Bather Load also play an important part.
Filtration
The filter is the part of your spa that removes the
debris from the water. Even though Cal Spas uses the
advanced Bio Clean filter cartridge that protects itself
from bacterial growth, the filter still needs to be cleaned
on a regular basis to maximize your spa's filtering
performance and heating efficiency.
In addition to spraying off the filter weekly to remove
surface debris, your filter should be deep cleaned
periodically to dissolve scale and other contaminants
that get lodged deep within the filter fibers and impede
the filtration process. Even if the filter looks clean, the
contaminants can clog the fibers and prevent water
from flowing through the filter resulting in the most
common spa problem—no heat, caused by a dirty filter.
Filter Cleaning
•
Place the dirty filter into a bucket of water deep
enough to cover the filter. Add 8 oz of Cal Spas
"Liquid Filter Cleaner" to the bucket of water.
Note: It is a good idea to keep a spare filter to be deep
cleaned while the regular filter is in the spa. This way,
you can rotate the filters and both will last longer.
•
Soak the filter for a minimum of 24 hours.
•
Remove the filter and spray clean with a water
hose. Spray each pleat carefully.
•
Allow filter to dry completely (a minimum of 2 days
drying time is recommended).
•
Reinstall filter as described in the "Clear Water
Plan".
Filtration Cycles
The filtration cycle of your spa is the process that
allows the water to flow through the filter. Your spa
will filter automatically twice each day. The factory set
Page 19