Touchscreen; Waveform View; Library View - Rane Seventy-Two MKII Guía De Usuario

Operation

Touchscreen

To toggle between Waveform and Library views, press the View/Menu button.

Waveform View

In Waveform view, track waveforms are displayed vertically, with
Channel 1 on the left side and Channel 2 on the right side. The large
waveform represents a section of the current track. The smaller
waveform represents the entire current track.
1. Time: Displays the time remaining of the current track.
2. Key/Key Lock: Hold Shift and tap this icon to toggle between
the Key and Key Lock views. When Key is selected, the key of
the current track will be displayed, and you can tap to enable or
disable Key Sync. When Key Lock is selected, a Key Lock icon
(or Serato Pitch 'n Time icon, if installed) will be displayed, and
you can tap to enable or disable Key Lock. When any option is
enabled, the field will be highlighted.
3. Overview: The smaller waveform represents an overview of the
entire current track. You can use your finger to "scrub" through
the track while it is playing. Also, you can pinch two fingers to
zoom in on the bigger waveform and spread two fingers to zoom
out.
Note: If the Disable Needle Search option in Serato DJ Pro has
been enabled, you will need to hold Shift to scrub through the
track.
4. Song Position: Playhead position of the current track.
5. Hot Cues: Displays hot cues by color.
6. Sync: When Sync is enabled, the field will be highlighted and the
BPM indicators will color blue. To enable or disable Sync, hold
Shift and tap the icon for either channel.
7. BPM: Beats Per Minute of the current track.
Note: If Load/Scroll Touch is on and you are in Waveform View, touching the Load/Scroll knob will
quickly bring up Library View. See

Library View

In Library View, the display shows the Serato library of the
connected computer. If Seventy-Two MKII is connected to two
computers, the one to which both decks were last assigned will
be shown.
To change view modes, swipe down on the pull-down menu
icon at the top of a tracklist view, then tap the icon for the desired
mode—Simple View or Expanded View.
To browse tracks, turn the Load/Scroll knob.
To quickly scroll, press Shift and turn the Load/Scroll knob.
To open a crate or load a track to a deck, press the
Load/Scroll knob.
To move back a level, press Back, or press the back arrow
located in the top-left region of the touchscreen.
Main Menu to learn how to turn this option on or off.
1
2
3
4
5
6
7
Touchscreen with
Library Simple View
9