Jumper JPD-FR412 Manual De Instrucciones página 23

After a measurement
(1) After each measurement, you can enter the recall mode and query
earlier temperature readings. For more details, see "Recall 20
memories" in the preceding table.
(2) After each measurement, clean the temperature probe with a soft cloth,
and put the thermometer in a dry and well-ventilated place.
It is dangerous to make a self-diagnosis or self-treatment based on the
obtained measurement results. For such purposes, please consult a doctor.
Notes:
(1) The thermometer is suitable for an indoor environment without strong
air convection (for example, winds from a fan, an air-conditioner, or a
heater) between the thermometer and the person.
(2) Make sure that the ear canal is clean and dry before starting a
measurement. It is recommended to clean the ear canal with a cotton
swab if any dirt exists. Otherwise, the temperature probe may be
polluted and temperature readings may be inaccurate.
(3) Do not hold the thermometer for a long time, because it is sensitive to
the ambient temperature.
(4) Make sure the sense head is free of foreign matters before use;
(5) Make sure the forehead has no sweat and no hairs covered before
measure the forehead temperature; otherwise, the result could be
incorrect;
20
EN