Storage And Transportation - Jumper JPD-FR412 Manual De Instrucciones

Storage and Transportation

The thermometer can be transported using general transportation tools.
Severe vibration, shock, or rain must be avoided during transportation.
The thermometer must be packaged and then stored in a well-ventilated
room without corrosive gas. The ambient temperature must be between
–20°C and +55°C （-4°F–131°F） , the relative humidity must be lower than
95% (non-condensing), and the atmospheric pressure must be 50–106 kPa.
EMC Information-Guidance and Manufacture's
Declaration
CAUTION:
● The Infrared Thermometer JPD-FR412 needs special precautions
regarding EMC and needs to be installed and put into service according to
the EMC information
DOCUMENTS.
● Portable and mobile RF communications equipment can affect
Thermometer JPD-FR412.
● The Infrared Thermometer JPD-FR412 should not be used adjacent to or
stacked with other equipment.
Guidance and manufacturer´s declaration – Electromagnetic emission
–for all equipment and systems
Guidance and manufacturer´s declaration – Electromagnetic emission
The Infrared Thermometer JPD-FR412 is intended for use in the
electromagnetic environment specified below. The customer or the
user of the Infrared Thermometer JPD-FR412 should assure that it is
provided for
27
in the ACCOMPANYING
EN
Infrared