Channel Control; Selecting Me Antenna; Clearing Scrambled Channels - Digl - Samsung LN-T4061F Manual Del Usuario

Channel Control
,_se!ec_,,n,_, ' the Antenna
1, Press the MENU button to display the menu.
Press the A or T buttons to select "Channel", then press the ENTER button.
2=
Press the ENTER button to select "Antenna".
Press the A or T buttons to select "Air" or "Cabte",then press the
ENTER button.
Press the EXIT button to exit.
[_1 Press the ANTENNA button on the remote control.
:_ If the antenna is connected toANT 1 IN AiR
select Air" aria if it is connected to ANT 2 IN
tCABLEI, select "Cable".
I III
Clearing Scrambled Channels - Digital
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed.
tt removes the scrambled channels from the list by tuning the digital cable channels. This process may take up to 20~30 minutes.
1, Press the MENU button to display the menu.
Press the A or _' buttons to select "Channel", then press the ENTER button.
2, Press the A or V' button to select"Clear Scrambled Channel", then press the
ENTER button.
tt searches scrambled channels, which are to be removed from the list.
To stop searching scrambled channels;
Press the • button to select Stop, then press the ENTER button.
Press the 4 button to select Yes, then press the ENTER button.
3, When the scrambled channel searching is completed, press the ENTER button.
Press the EXIT button to exit.