BRÖTJE RGT B Instrucciones De Montaje página 37

Tab. 3: Wireless parameter
Prog. no. Setting level
Wireless
120
121
130
131
132
138
Fig. 11: Display with active test mode
Gesendete
Datenpakete
136231-02 10.15
Function
Binding
C
Yes | No
Test mode
C
Yes | No
Room controller 1
C Missing | Ready for operation | No reception | Change batter-
ies
Room controller 2
C Missing | Ready for operation | No reception | Change batter-
ies
Outside sensor
C Missing | Ready for operation | No reception | Change batter-
ies
Delete all devices
C
Yes | No
Test wireless connection
For testing the wireless connection proceed as follows:
1. On the RGTF/RGTKF room controller call up the setting level "Wireless"
2. Select menu option "Test mode" (prog. no. 121), see tab. 3)
3. Select option "Yes" to start the connection test
Note: The connection test has been successful if at least 50% of the transmitted
data can be received by the room controller (see Fig. 11 ). The status of the wireless
accessories can be scanned under prog. no. 130-132.
C0003174
For detailed information on programming the integrated RVS system controller
and setting tables with the programmable parameters, see the boiler installation
manual.
Room device RGT B/RGTK B and RGTF B/RGTKF B
Commissioning
Standard value
No
No
Missing
Missing
Missing
No
Empfangene
Datenpakete
GB
37