Environmental Protection - Metabo R 12-18 Manual De Instrucciones Original

en ENGLISH
Press the "STATION" button (8) briefly (store
radio station).
• Listening to stored radio stations:
Press "STATION" button (8) briefly until the
desired stored radio station is shown on the
display (14) and played.
7.5 Operation R 12-18 DAB+BT
AM/FM
• Searching for radio stations:
Press "|<<" key (6) or ">>|" key (7) to change the
frequency. The current frequency is shown on the
display (14). To search the next radio station
with high signal strength, press and briefly
hold the "|<<" key (6) or ">>|" key (7). The
frequency of the radio station found is shown on
the display (14).
• Store set radio station:
Briefly press "SELECT" key (9), click with ">>|"
key (7) to the point "Store to Preset" and confirm
with briefly pressing on the "SELECT" key (9),
select storage space with "|<<" key (6) or ">>|"
key (7) and confirm with "SELECT" key (9).
• Listening to stored radio stations:
Press "SELECT" key (9) and navigate with arrow
">>|" key (7) to point "Select Preset". Confirm
briefly with "SELECT" key (9) and select station
using "|<<" key (6) or ">>|" key (7) and confirm
with "SELECT" key (9).
DAB/DAB+ (Digital Audio Broadcasting)
• Station scan (starts automatically on initial
commissioning):
Press "SELECT" key (9) and select between
"Auto Scan" and "Manual Tune" using the ">>|"
key (7) - confirm your selection by briefly pressing
the "SELECT" key (9) (Auto Scan should be
preferred)
• Set the desired station:
After the auto scan, all found stations are stored
automatically, browse the received stations with
"|<<" key (6) and ">>|" key (7).
• Selection display settings:
Press "SELECT" key (9), jump to the subitem
"RDS Display" using ">>|" key (7). You will get to
the menu by pressing again the "SELECT" key
(9). Here select your favourites with "|<<" key (6)
and ">>|" key (7).
Note: DAB / DAB+ is not transmitted in all
countries or areas and cannot be received then.
7.6 Bluetooth (depending on configuration)
1. To change to BT (Bluetooth), press the "MODE"
button (5) several times, until BT shows on the
display (14) .
2. Activate Bluetooth on your smart phone (or
another mobile device such as a tablet).
3. If your smart phone has detected the radio, it will
be shown with the device name "METABO R 12-
18 BT" / „METABO R 12-18 DAB+BT".
4. On your smart phone establish the connnection
to the device "METABO R 12-18 BT" / „METABO
R 12-18 DAB+BT".
10
The successful connection is shown on the
display (14) by pressing the symbol (12).
5. Start replay e.g. of a song on your smart phone.
7.7 Setting treble, bass, M-sound
(depending on configuration)
"M-sound" is a fixed, predefined value for treble and
bass.
To change between treble, bass and M-sound,
press the "EQ" button (4) several times.
The active mode is shown on the display (14):
"TREBLE", "BASS" and "M-sound".
The set value is shown in the display (14).
To change the setting, press the "–" button (2) or the
"+" button (3) .
7.8 Battery pack, displaying the battery pack
charge level
The battery symbol (13) on the
display (14) shows the charge level
of the battery pack (18).
Recharge an empty battery pack in a
suitable Metabo charger.
Remove battery pack:
Press the battery pack release (17) button and
remove the battery pack (18).
Insert battery pack:
Slide in the battery pack (18) until it engages.
8. Accessories
Only use original Metabo battery packs and Metabo
accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
See www.metabo.com or the catalogue for a
complete range of accessories.
9. Repairs
Repairs to radios must only be carried out by
qualified electricians!
If the mains adapter of this device is damaged, it
must be replaced with an original Metabo spare part
to prevent hazards.
Contact your local Metabo representative if you
have Metabo radios requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.

10. Environmental Protection

Observe the national regulations on
environmentally compatible disposal and on the
recycling of disused tools, packaging and
accessories.