Pro Breeze PB-H06 Manual De Instrucciones página 4

SPECIFICATION
- Rated Voltage and Frequency: 220-240V, 50Hz
- Wattage: 2500W
- Size: 500mm x 245mm x 660mm
- Net Weight: 16kg
SAFETY CONTROLS
This heater has three levels of protection.
Automatic Thermal Cut-Off: If set to High power mode and overheating is
1.
detected the automatic thermal cut-off switches the heater from High power mode
to Medium power mode. Once the temperature drops to a normal level the heater
will automatically return to High power mode.
Thermal Fuse: If the automatic thermal cut-off fails to operate, the thermal fuse
2.
will activate and cut the power to the heater. This is a non-resettable switch that
will have to be professionally replaced.
Safety Tip-Over Switch: If the heater tips over the safety tip-over switch will
3.
activate and cut the power to the heater. Once the heater is returned to the upright
position it will enter stand-by mode and the settings must be reset for operation to
resume.
ASSEMBLY
1. Turn the radiator upside-down on a scratch
-free and stable surface to prevent damage
to the paint finish or your floor surfacing.
2. Gently extend the wheels from the closed
position to the open position until they click
into place.
3. Turn the radiator back upright.
Caution: Only operate the radiator when in its normal upright position with the wheels in
the open position.
3 | English