Notes; Operating; Warning - brennenstuhl Tv Energy stop Manual De Instrucciones

TV Energy Stop
6

Notes

x
The TV Energy Stop permanently stores the IR code, i.e.
the function also remains even after a disruption of power.
x
In order to establish another IR code, the starting must be
repeated.
7

Operating

x
Switching on the TV set:
Press the on switch of your TV remote control until the TV
set switches on.
(First, the TV Energy Stop switches on and shortly
afterwards the TV set)
x
Switching off the TV:
As usual, press the off switch on your TV remote control.
The TV set switches to the standby mode. After a period of
delay, approx. 1 minute, the TV Energy Stop switches off
the TV set completely and, therefore, saves the standby
power input of the TV set.
x
Manual switching of the TV Energy Stop:
Short activation of the pushbutton on the TV Energy Stop
can change between the on and off switching condition of
the socket. The switching condition of the socket is
indicated by the indicator lamp.
8

Warning

x
Do not use in series.
x
Only de-energized when not plugged in.
Operating Instructions 14 08-2008