Velleman RCQC6 Manual Del Usuario página 6

6. Flying the Drone
6.1 Preparing Your Flight
1. Place the drone on a flat surface.
2. Push and hold the throttle stick completely downwards.
3. Switch on your remote control by sliding the on-off switch to the on
position. Push the throttle stick completely upwards, and then push it
completely downwards. Synchronizing has been completed when the
remote control beeps and the power LED burns steadily.
6.2 Basic Manoeuvres
Hovering up and down
V. 01 – 20/06/2017
RCQC6
6 ©Velleman nv