WMF Ambient Pro Instrucciones De Uso página 14

For UK use only
▪ This product is supplied with a 13 A plug conforming to BS 1363 fitted to the mains
lead. If the plug is unsuitable for your socket outlets or needs to be replaced, please
note the following. If the plug is a non-rewireable one, cut it from the mains lead
and immediately dispose of it. Never insert it into a socket outlet as there is a very
great risk of an electric shock.
▪ The replacement of the plug at the mains lead has to be done according to the
following instructions:
Important: The wires in this mains lead are coloured in accordance with the follow-
ing code:
blue Neutral
brown Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
⋅
the wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black,
⋅
the wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
Do not connect any wire to the terminal which is marked
with the letter E or by the earth symbol
▪ If a 13 A (BS 1363) plug is used it must be fitted with a 13 A fuse conforming to BS
1362 and be ASTA approved. If any other type of plug is used, the appliance must be
protected by a 10 A fuse either in the plug or adapter or at the distribution board.
If in doubt - consult a qualified electrician.
▪ Never use the plug without closing the fuse cover.
14
, or coloured green or green and yellow.