WOXTER Big Bass 500 R Manual De Usuario página 7

FUNCTION KEYS ON REMOTE CONTROL
1 STAND-BY:
Press it for a stand-by mode, re-press it shift to be normal playing mode.
2. REPEAT:
Press it to repeat the single playing file/song , re-press it to repeat whole
file, press again to cancel repeating.
3. RESET: Press it back to initial settings.
4. BT Pair: Press it for a fast/direct BT pairing or off pairing under BT mode .
5. MUSIC: Press it for a music sound effect (EQ mode).
6. USB: press it for a direct USB playback mode.
7. MOVIE: Press it for a movie sound effect (EQ mode).
8. : Press it to play or pause playing.
9. NEWS: Press it for a NEWS sound effect (EQ mode).
10: Press it to play the next file/song, Long press it for a fast forward
playing.
11: 3D: Press it for 3D sound effect (EQ mode) and the LED display will
show 3D.
12: Press it to play the previous file/song, long press it for a fast rewind
playing.
13. AUX: Press it for a direct AUX in working mode
14. BT: Press it for a direct BT mode and the system ready for BT pairing.
15. USB: Press it for a direct USB/SD playing mode.
16. FM: Press it for FM program reception mode
17. VOL-: Press it to decrease sound volume.
18. Mute: Press it for a silence mode ,re-press it back to normal sound
mode.
19. VOL+ : Press it to increase sound volume.
USE OF REMOTE CONTROL
1. For a better RF reception, to wave the remote
control at an angle of 30 to the Sensor located nearby
the LED display. Also keep a working distance of 5M.
2. The remote requires 2 pieces of battery UM-4 AAA
(1.5V), open the battery door and load 2pcs of UM-4
batteries in the direction show, then replace the
battery door.
3. If the system not use for a long time, take off
batteries to avoid battery liquid leaking out and
damaging the components inside the remote control.
EN
6