Holiday Mode - DELTACALOR 750 W Manual De Usuario

Then you can adjust the step hour with [-] or
[+]. When step hour is set press OK to jump
to the next step.
You will be directly invited to adjust with [-]
or [+] the hour of the comeback step.
Press OK to validate and go to the following
step.
You are again invited to choose the type of
the next step of the program (blinking icons),
two choices will be possible:
• sleep icon. (End of the day)
• leaving icon, to add one step to the pro-
gram during the day.
When the choice is made, press OK to valid
and you can adjust the hour of this step with
[-] or [+],
Press OK to validate and finish the edition of
the first day.
Now you can choose to copy the program
day just created to subsequent days
Change the choice "Yes" or "no" with [-] or
[+] and validate your choice with OK.
• If you select "no", you will be invited to
create a program for Tuesday (repeat the
previous method to build it.)
• If you select "Yes", you will have the possi-
bility to copy the program to the following
day (on Tuesday on Wednesday... up to the
last day of the week (7=Sunday).
When you press OK on the last day (7=Sun-
day) you will be invited to "SAVE" your pro-
gram. Then the message "Save" and blinking
green LED appears:
Press OK key to save your program and re-
turn to AUTO operating mode following your
user program. Press the escape key ESC to
erase your user program changes and come
back to operating mode.

Holiday mode

The Holiday mode allows you to set the an-
ti-freeze temperature for a selected number
of days.
• You can adjust, the duration in day "d" with
[-] or [+], press OK to start (Adjustable
1 to 44 days).
Note - A holiday period consists of 24-hour days
(if it starts at 8:20 it will end at 9:00 on the last
day set)
• The anti-freeze setting temperature is fixed
and can be adjusted in the parameter menu
number 06 'HG', refer to chapter 5.
• The icon for this mode will flash and the
countdown will start.
To interrupt the holiday mode before the set
time limit, simply press the [-] key repeatedly
until "no" appears. Select a standard operat-
ing mode with the navigation keys [<] and
[>].
Timer mode
The Timer mode allows you to adjust, the
temperature for a special time (eg in case of
absence, when you have guests, etc.).
[ EN - 34 ]