DJ-Tech DJ KEYBOARD Manual De Instrucciones página 5

27. PITCH BEND – Press for Pitch Bend function for the deck.
28. PITCH FADER – Control the pitch of the deck.
29. USB PORT – Connect to computer with the USB cable included.
30. DC JACK – Connect to a DC 5V
computer USB port cannot provide enough power for the unit, or
when the USB OUT port is in use. When connected to an adaptor,
the CUE and PLAY button will be lightened in Red and Blue
respectively.
31. USB OUT – USB port for connecting to other USB device like USB
Pen Drive or USB Headphones.
E. How to use the Multi-touch Mouse Pad
The integrated mouse pad can be used as a normal mouse, and in Deckadance, you can
control different parameters and scratch your music with the pad's multi-touch feature:
1. Use one finger to move the mouse like
normal mouse device.
3. To control the Faders, Crossfader, EQ
and other parameters, move the
curser to the control and use 2 fingers
to scroll like no. 2.
Please refer to the Software User Manual of full description of the Deckadance LE. The Software
User Manual can be found in the software CD or after software installation.
F. Specification
Connection Interface: USB1.0/ 1.1/ 2.0
Operating Voltage:
Current Consumption: < 200mA
adaptor when the
2. Use 2 fingers and move up and down on
4. To scratch the music, move the curser to the
Dimension: 403mm (L) x 150mm (D) 37mm (H)
USB 5V Weight:
- 4 -
the pad for scrolling function.
waveform of the deck and use 2 fingers to
scroll on the waveform for scratching
features.
625g