OK. OEB 102-W Manual Del Usuario página 20

Size - A6
OPERATION
1
Fill the filling cup with
water up to the marking
of desired degree of
hardness and number
of eggs. Pour the water
into the water tray.
4
Switch the egg boiler on
by putting the On/ Off
switch onto position I.
The indicator lights
up. Once the water is
boiled, a signal tone is
heard and the indicator
light goes out.
OEB102-W_A6_131017.indb 20
20
2
Pierce the blunt end of
the eggs by using the
egg pricker and place
them with the blunt side
up into the egg tray.
This will reduce the risk
of the eggs cracking
during boiling.
5
Set the On/Off switch to
position O and unplug
the product.
3
Place the egg tray onto
the base unit and put
on the lid. Connect the
power plug to a suitable
power outlet.
6
Open the lid.
Caution! Hot stream
will escape. Remove the
egg tray with the handle
and place it immediately
under cold running
water.
Size - A
17/10/13 4:52 PM