Installing The Wall Holder; Operation - Unold 87396 Manual De Instrucciones

For safety reasons never use
the appliance close to or in
a bathtub or washbasin or
any other container filled
with water. If the hair dryer
is used in a bathroom, unplug
it from the wall socket after
the manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

InStallIng the Wall holDer

1. Caution: If you want to install the
wall holder in damp rooms, such
as bathrooms, ensure that there
is an adequate distance to the
bathtub, sink and other vessels
filled with water. The distance in
this regard must be at least 1.5
meters to ensure safe operation.
2. First check whether an electrical
outlet is within reach at the desi-
red installation location.
3. Attach the wall holder with three
screws. If necessary use dowel

oPeratIon

1. Ensure that the on/off switch is on
"0".
2. Plug the power plug of the wall
holder into an electrical outlet
(220–240 V~, 50/60 Hz).
3. Take the hair dryer out of the wall
holder.
4. Switch the appliance on via the
On/Off switch.
5. Select the desired speed level.
The following settings are availa-
ble:
0 = Off
1 = Moderate air flow, for drying
and styling hair
2 = Powerful air flow and heat
flow, for fast drying of hair
6. With the cooling button/cooling
stage you can give your hair style
the finishing touches and add
body to your hair. You must keep
use, since nearby water presents a
danger even when the hair dryer is
switched off.
plugs to securely attach the wall
holder. Please use the attached
drill template for easy installation.
note: at the back of the wall hol-
4.
der there is a small tab. If you
mount it first with a screw on the
wall, you can simply mount the
wall holder and then secure it
with the other two screws on the
right and the left hole.
the button depressed during the
desired period of operation, to get
obtain a cool air flow.
7. After drying your hair, switch
off the appliance via the On/Off
switch and hook it back into the
wall holder.
8. The appliance is equipped with a
safety function: Should you for-
get to switch off the appliance, it
will be switched off automatically
when it is hooked into the wall
holder. Nevertheless, the device
should be switched off using the
on/off switch!
9. Unplug the power plug from the
electrical outlet.
caution! the appliance is very
hot during and after operation!
17