5
Cleaning and changing air filter
Figure 06
Figure 07
① Air grille
② Centre line
③ Positioning aid
5.3
Changing air filter
Change the air filter at least every 3 months to ensure the proper functioning
of your hood hairdryer
Follow safety instructions as described in section 5.1.
1st
filter cover
Turn the
2nd
air filter
Take the
out of the appliance and replace it..
3rd
filter cover
Put the
on and turn it to the right (clockwise) as far as it will
4th
go.
5.4
Changing recirculated air filter
Change the recirculated air filter at least every 3 months to ensure the proper
functioning of your hood hairdryer.
Follow safety instructions as described in section 5.1.
1st
CAUTION – Damage to the appliance - Do not use tools:
•
Only undo / tighten the fastening screw with a suitable coin (e.g.
10 pence piece).
To take out the
fastening screw ,
2nd
pence piece) to the left (anticlockwise).
hairdryer dome
Take hold of the
3rd
appliance.
CAUTION – Risk of injury:
•
If the appliance is operated without the
hairdryer dome
the
fan impeller under the
•
• Do not operate the appliance without the
hairdryer dome
or the
Take the
recirculated air filter
4th
Insert the
hairdryer dome
5th
the appliance's imaginary
•
You will find the
positioning aid ③
notch on the lower edge of the
•
hairdryer dome
The entire
fastening screw
Screw in the
6th
and tighten.
Check that the
hairdryer dome
7th
53
Figure 06
to the left (anticlockwise) and remove.
Figure 07
unscrew with a suitable coin (e.g. 10
with both hands and take it out of the
recirculated air filter
, the customer's hair can get entangled in the
air grille
①.
.
out of the appliance and replace it.
in such a way that the
centre line ②.
in the form of a visible and perceptible
hairdryer dome .
head piece .
must sit inside the
with a suitable coin to the right (clockwise)
is securely in place.
GB
or
recirculated air filter
positioning aid ③
sits on