Care And Maintenance - Roadstar CLR-2496P Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
TIME PROJECTOR
Time projector could be adjusted by scrolling the FOCUS & IMAGE ROTATION.
Scroll the FOCUS (14) for tuning the clear time projection image. Scroll the IMA-
GE ROTATING (13) for tuning the best time projection angle.
SNOOZE FUNCTION
When the alarm sounds, pressing the SNOOZE Button (2) will temporary stop
about 9 minutes then the alarm sounds again.
SLEEP FUNCTION
This function enables you to go to sleep listening to the Radio.
1. Press the SLEEP Button (2). The clock display will show 90 minutes. The
Radio turns on and will turn off automatically after 90 minutes.
2. To select a shorter time press the SLEEP Button (2) while holding until the
desired sleep time is displayed.
3. To turn off the Radio at any time during the Sleep period, press the SNOO-
ZE Button (2).

CARE AND MAINTENANCE

To prevent fire or shock hazard, do not allow this clock radio to be exposed to
rain or moisture.
This clock radio should not be exposed to direct sunlight, very high or low tem-
perature, moisture, vibration, or placed in a dusty environment. Do not use abra-
sives, benzine, thinners, or other solvents to clean the surfaces of the clock ra-
dio. To clean it, wipe with a mild non-abrasive detergent solution on a clean soft
cloth.
Never attempt to insert wires, pins, or other objects into the venlilation holes or
openings on the clock radio.
English
5
6
English
AC POWER
For your own safety read following instructions carefully before attempting to
connect this clock radio to the mains.
This unit is designed to operate on a 230V~50Hz supply onl. Connecting it to
other power sources may damage it.
Ensure that supply corresponds to the information on the rating label on the
bottom of the unit.
RESET (RESET OPERATION)
Remove the memory Back- Up battery and cord for three minutes.
SPECIFICATIONS
FM Band:
Power Supply:
Back-up Battery:
Specifications subject to change without notice.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not be di-
sposed with other household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources. Househol d users shoul d contact ei ther the
retai l er where they purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
87,5 to 108 MHz
230VAC, 50 Hz
3V CR-2032 (not included)

Publicidad

Tabla de contenido
loading

Tabla de contenido