SECURITY
Avoid using the skate on rainy days.
Avoid use in areas not conditioned, with potholes or signs in poor
condition.
If you can not avoid traveling through these areas, do it at minimum speeds
FOLDING AND TRANSPORTATION
Before folding the skate, make sure it is off, open the locking lever, bend
the skate and hook the handlebar part to the rear fender hook.
Once folded hold the skate by the bar to transport it as indicated in the
figure:
MAINTENANCE
This skate can be used as a means of transport and as such requires
maintenance of all its components, which suffer wear and tear due to the
use
of
the
same
and
is
not
covered
by
the
warranty.
CLEANING
To clean the skate, use a damp cloth. If you need to scrape dirt, use a soft
brush and then a damp cloth. In case the dirt is very sticky you can use a
little toothpaste. Remember to wipe with a damp cloth after this.
Be sure to keep the skid off while cleaning and make sure you cover the
load
inlet
to
avoid
problems
with
the
electronic
components.
Do not use alcohol, gasoline, kerosene or other volatile or corrosive
chemical components. This can damage both the appearance and the
internal structure of the scooter. Also, do not use a pressure water gun or
running water.
CONSERVATION
Store the scooter in a cool, dry environment when not in use. Avoid leaving