NORMA CONNECT FGR REP E Instrucciones De Montaje página 3

Removal Instructions
1.
20
15 25
0 bar !
10 30
5 35
0 bar 40 Ensure that the piping system is not pressurised.
2.
Protect yourself from the medium and drain the piping.
3.
Loosen bolts alternately, and take them off completely. Fold up the coupling and remove it from the damaged point
on the pipe.
4.
Caution: Do not damage sealing lips when widening.
5.
Release the coupling from the pipe by widening the housing between the lock bars.
6.
Before refitting, clean the coupling without the addition of cleaning agents and grease bolts with suitable lubricant
(Molykote 1000 bolt paste or equivalent, if necessary, consult manufacturer).
Note: If used in enamel coating areas, the couplings must not come into contact with substances which prevent the
surface from being wetted (e.g. greases containing silicone).
Fitting Instructions English
www.normagroup.com
3