Operating Instructions
Preparations before usage
1. Make sure battery is fully charged.
are on.
2. Secure battery. A click should be heard if its secured correctly.
following diagram)
3. Check for damage on the product's shell before use. If there is visible damage, do
not place product underwater for use. To test the thruster, press the two start
buttons while the scooter is in the air. Do not run for more than one minute outside
the water. Pay attention to any jamming or abnormal noises.
4. To prevent loss, a lanyard is provided and can be used during diving. Pay attention
to surroundings to prevent entanglement.
5. After passing inspection, it can be used. In case of any problems, stop use
immediately.
This is shown when all five battery indicators
Install
the
battery
Before installation
- 9 -
(as shown in the
"click" sound
After installation