Maintenance Instructions
Cleaning After Use
After using the WHITESHARK MIX in a seawater or freshwater environment, please
clean it immediately as followed:
1. Fully immerse the WHITESHARK MIX in a container filled with clean fresh water
for 20 minutes.
*Clean water may not be seawater.
*Do not add laundry detergent, cleansers, or other cleaning products in the water.
*When the WHITESHARK MIX is immersed in water, some air bubbles will discharge. This is normal.
2. While submerged in the water, press the switch with both hands to make the
WHITESHARK MIX operate for three seconds. Repeat this step five to ten times.
*To prevent splashing water on yourself during operation, keep the propeller outlet towards the bottom
of the container.
*Since the WHITESHARK MIX has a greater thrust in water, slightly lift it out of the water for easier
cleaning and control.
3. Fully shake and clean the WHITESHARK MIX to remove attached foreign
objects.
4. Wipe away water with a clean soft dry cloth. Make sure that there is no water
around the body and batteries. Remove the batteries and place them separately
in a cool ventilated area to dry.
*Never use a hot air blower or a dryer for drying.
- 12 -