Intended Use; Before First Time Use; Heating Water - OK. OWK 103-W Manual De Instrucciones

INTENDED USE

This product is suitable for heating water only. Any other use may result in damage to product or injuries.
COMPONENTS
The product may be available in different colors.
A. Handle of the lid
B. Spout
C. Filter (not shown)
D. Water level indicator
E. Stand
F. Power cord with plug
G. ON/OFF switch
H. Handle
I. Lid

BEFORE FIRST TIME USE

Fill the kettle with water to the MAX level and operate it. Repeat this process 2-3 times. This will remove
any residues remaining from the manufacturing process.

HEATING WATER

Connect the power plug to a suitable power outlet.
1
Open the lid.
2
Fill the kettle with water to the desired level (min 0.75 / max 1.7 L)
3
Do not exceed the MAX level.
4
5 Close the lid until it clicks into place. Place kettle on stand.
Use the power switch to switch kettle on (I). Power indicator turns on.
6
The kettle will switch off automatically, once the water has boiled. Wait 15-20 seconds before
7
operating again.
Unplug the power plug from the power outlet.
8
Caution: Do not open the lid when steam is emitted from the spout.
Note: You can stop the boiling process at any time by lifting the power switch (0).
IM_OWK103-W_150402_V01_HR.indb 13
13
EN
2/4/15 12:10 PM