OK. OTF 151-W Manual Del Usuario página 24

Size - A5
ASSEMBLY OF REAR GUARD (OTF 231-W/OTF 301-W)
1
If still attached, remove
the plastic nut (LOOSEN).
ASSEMBLY OF FAN BLADE (OTF 231-W)
ASSEMBLY OF FAN BLADE (OTF 301-W)
4
Slide the fan blade onto
the motor shaft so that the
pin locks to the groove.
OTF151-W_OTF231-W_OTF301-W_A5_121129.indb 24
24
2
Attach the rear guard to
the motor housing; align
with the pins.
4
Push fan blade onto motor shaft until locked. Make sure
that the metal rings inside the fan blade are in the proper
position.
5
Secure the fan blade with
the spinner (TIGHTEN).
3
Secure the rear guard with
the plastic nut (TIGHTEN).
3/12/12 5:59 PM