Product And User Description; Battery Indicator - Konic SAS-SA100 Manual De Uso

• Test button: Yes
• Low battery alert: Yes
• Operating temperature: -10 °C ~ +40 °C

Product and user description

1
1. Test button / battery indicator
Testing the smoke alarm
Like any other electronic device, smoke alarms are not foolproof. Smoke alarms
contain electronic components that can fail or wear out at any time.
We recommended that you test the smoke alarm every week to make sure it is
working properly.
Push and hold the test button until the alarm sounds for a few seconds. If it does
not sound, check if the battery indicator flashes once every 45 seconds. If this is
not the case, replace the battery immediately.

Battery indicator

The battery indicator flashes every 45 seconds to show the smoke alarm is
working properly. When the battery indicator flashes and gives a short beep
sound, it is indicating that the battery has low capacity and should be replaced
immediately.
2. Mounting plate
3. Mounting holes
Use the supplied screws and plugs to mount the mounting plate to the ceiling.
3
3
2
3
ENGLISH